Conquest MOAB V-Bar Bracket for Stabilizers

Description:

The Conquest MOAB V-Bar Bracket is built to be one of if not the Strongest V-Bar Brackets in Archery! With an OD of .850 this Bracket is made to align for a perfect fit on ALL of our end caps on all the bars!

Front mount- this 9-piece unit has two fully adjustable pivoting knuckles with 38 large interlocking metal teeth that mate with 38 teeth on the 2 upper and 2 lower arms connections. That means that every joint on the v-bar has 76 metal teeth....4 joints = 304 teeth on each v-bar. The two end knuckles are quick disconnects with black nitrided steel pins. A simple half turn will quickly remove your rods for storage. The middle bracket is machined to attach to the front of your bow with a quick disconnect, up to .850" in diameter QD is included for front rod. In addition, there are calibration marks on each joint, so you can micro adjust them. This is the most versatile heavy-duty v-bar in the industry.

REAR MOUNT- This 7-piece unit has two fully adjustable pivoting knuckles with 38 tiny interlocking metal teeth that mate with 38 teeth on the 2 upper AND 2 lower arm connections. That means that every joint on the V-bar has 76 METAL teeth....4 joints = 304 teeth on each V-bar. The two end knuckles are Quick Disconnects with Black Nitrided steel pins. A simple half turn will quickly remove your rods for storage. The middle bracket is machined to attach to the REAR of your bow. In addition, there are CALIBRATION MARKS on each joint, so you can MICRO ADJUST them. This is the most versatile Heavy-Duty V-bar in the industry.